|
3D mice get designers out of the dark ages, says survey
|
25/07/2008
|
| |
Most (84%) of CAD engineers that expressed an opinion reported a noticeable or significant improvement in product design and their ability to detect problems, due to using 3D mice, according to a survey.
The survey, commissioned by developer 3Dconnexion and undertaken by MarketLab in the US, also indicates 83% of the 190 users surveyed indicating that a 3D mouse’s six degree of navigation freedom is either very or extremely useful.
Most (86%) engineers also noticed an increase in productivity – ranging from under 10% to more than 50% – and the majority achieved improvements within the first week.
As for working simultaneously with both hands, 75% found this to be at least very useful, while 49% found it extremely useful.
Users stories are convincing: “Since Bosch Rexroth Canada’s migration to a 3D design environment in 2003, we have been using 3Dconnexion’s products exclusively,” says Jim Lambert, design manager, Bosch Rexroth Canada.
“We have always been impressed with how much design time we have been able to save by using 3Dconnexion’s 3D mice with Autodesk Inventor. The ability to navigate the 3D model while keeping your mouse hand free to interface with the software, has allowed us to achieve maximum output in minimum time.”
And the same goes for consultants: “To me, the ability to pan, zoom and rotate simultaneously is not just a convenience: it’s now an intrinsic part of our design process,” says Leo Greene, principal at E-Cognition. and leading PTC consultant.
“The efficiencies gained with 3D mice are imperative in today’s competitive environment. Removing our 3D mice would be like going back to scratching on the cave wall with a charred stick!”
|
| |
Author
Brian Tinham
|
| |
| Email this article |
| |
|
|
|
|